ISO600.69g/cm³密度 / 比重23°CISO11831.42g/cm³熔体体积流动速率300°C/1.2kgISO11334.00cm3/10min熔体质量流动速率300°C/1.2kgISO11335.0g/10min收缩率TDISO25770.25to0.40%MDISO25770.25to0.40%TD:2.00mm3ISO294-40.35%MD:2.00mm3ISO294-40.50%吸水率饱和,23°CISO620.22%平衡,23°C,50%RHISO620.10%机械性能测试条件测试方法测试结果单位TensileCreepModulus1hrISO899-14700Mpa拉伸模量23°CISO527-2/15100Mpa拉伸蠕变模量1000hrISO899-13900Mpa拉伸应变屈服,23°CISO527-2/502.5%断裂,23°CISO527-2/53.5%拉伸应力断裂,23°CISO527-2/555.0Mpa屈服,23°CISO527-2/5059.0Mpa弯曲模量423°CISO1784700Mpa弯曲应变523°CISO1784.5%弯曲应力43.5%Strain,23°CISO178100Mpa23°CISO178105Mpa热性能测试条件测试方法测试结果单位BallPressureTest137°CIEC60695-10-2Pass
RTIElec1.5mmUL746125°CRTIImp1.5mmUL746115°CRTIStr1.5mmUL746125°C导热系数823°CISO83020.24W/m/K热变形温度0.45MPa,未退火ISO75-2/B141°C1.8MPa,未退火ISO75-2/A135°C维卡软化温度--ISO306/B50147°C--ISO306/B120148°C线形热膨胀系数MD：23到55°CISO11359-23.5E-05cm/cm/°CTD：23to55°CISO11359-25.5E-05cm/cm/°C电气性能测试条件测试方法测试结果单位表面电阻率
IEC600931E+16ohms耗散因数23°C,100HzIEC602501.5E-03
23°C,1MHzIEC602509E-03
介电强度23°C,1.00mmIEC60243-136KV/mm漏电起痕指数解决方案AIEC60112175V解决方案BIEC60112125V体积电阻率23°CIEC600931E+16ohms·cm相对电容率23°C,100HzIEC602503.50
23°C,1MHzIEC602503.50
冲击性能测试条件测试方法测试结果单位CharpyNotchedImpactStrength623°C,CompleteBreakISO73918.0kJ/m²NotchedIzodImpactStrength723°C,CompleteBreakISO73918.0kJ/m²多轴向仪器化冲击力峰值-30°CISO6603-2800N23°CISO6603-21300N多轴向仪器化冲击能量-30°CISO6603-25.00J23°CISO6603-25.00J简支梁无缺口冲击强度-60°C,CompleteBreakISO179/1eU45kJ/m²-30°C,完全断裂ISO179/1eU45kJ/m²23°C,完全断裂ISO179/1eU40kJ/m²硬度测试条件测试方法测试结果单位球压硬度
ISO2039-1149Mpa可燃性测试条件测试方法测试结果单位ApplicationofFlamefromSmallBurner-MethodKandF2.00mmDIN53438-1,-3K1,F1
FlashIgnitionTemperature
ASTMD1929470°CSelfIgnitionTemperature
ASTMD1929550°CUL阻燃等级1.5mmUL94V-1
极限氧指数9
ISO4589-237%燃烧速率-US-FMVSS>1.00mmISO3795passed
热灯丝点火温度1.5mmIEC60695-2-13875°C3.0mmIEC60695-2-13875°C0.75mmIEC60695-2-13875°C针焰试验MethodF:1.50mmIEC60695-11-52.0minMethodF:2.00mmIEC60695-11-52.0minMethodF:3.00mmIEC60695-11-52.0minMethodK:1.50mmIEC60695-11-51.0minMethodK:2.00mmIEC60695-11-51.0minMethodK:3.00mmIEC60695-11-52.0min灼热丝易燃指数0.75mmIEC60695-2-12960°C1.5mmIEC60695-2-12960°C3.0mmIEC60695-2-12960°C补充信息测试条件测试方法测试结果单位ElectrolyticalCorrosion23°CIEC60426A1
ISOShortname
ISO7391-PC,GR,(,,)-05-3,GF30
